18 / 60
Do Your Vials Ever Get Tossed on The Floor?
MicroLiter’s 76-Series Vials
™
for Agilent Autosamplers
have a modified neck finish
that assists in a consistent,
repeatable seating of the
gripper against the bottom of
the cap. We believe that the
current neck design allows
for the arm to stop before the
gripper is fully seated. The
inconsistency of where the
vial hangs allows it to rock
once the arm begins the vial
transfer. The vial can become
tilted at an angle that makes it impossible for the arm to place
the vial, thus tossing it on the floor and causing an autosampler
error and subsequent downtime. When the 76-Series Vial cap
is properly applied, the autosampler transports the vial in a
vertical position that assists in returning the vial to any position
on the autosampler.
The Industry’s Most Versatile Autosampler Vial
This vial product line offers excellent performance on almost
all autosamplers. Even though the 9mm vial was designed
for Agilent 76-Series Auto Injectors, it has quickly gained
acceptance throughout the industry.
Add to that our Class 10,000 Clean Room Packaging and
you have a product that exceeds most OEM requirements
for an autosampler vial! Cleaner vials offer users improved
performance by eliminating almost all particulates. 9mm Screw
Thread Vials perform equal to 11mm Crimp Top Vials with the
convenience and accessibility of screw thread vials. With a cap
and special threads that match the shape of the 11mm crimp
seal design, samplers that transport the vials using this crimp
seal / neck configuration have new options.
MicroLiter’s vials meet strict tolerances set for these vials
to offer fluid performance on these instruments. Even septa
specifications are more clearly defined to allow you to make a
decision using the knowledge of the exact specification of the
product you have purchased. No other vial supplier offers the
chemist this much information.
Use 96-Well Extraction and Filtration Plates
Then Transfer to 12 x 32mm Vials
If you are considering, or are using, 96 well extraction or
filtration plates, elute your final sample into our
µL
plate
®
for 12
x 32mm vials, then transfer the inserts to any wide opening vial
for final analysis.
> 16
76-Series & 9mm Vials, 2.0mL, 12 x 32mm
Chromatography Vials, Caps & Inserts
The 76-Series Vial
™
(shown on left) features a modified neck design to reduces vial-related autosampler errors
Product Specifications
Vials
■
Closure Requirement......................................9mm Screw Thread Caps
■
Glass, Clear .......................................................Class 10,000 Clean, Type I, Borosilicate
■
Glass, Amber ....................................................Class 10,000 Clean, Type I, Borosilicate
■
Natural and Brown Plastic............................Polypropylene (All)
■
Silanization Type..............................................Vapor Phase Method
Inserts
■
Glass, Clear........................................................Type I, Borosilicate
■
Plastic, All...........................................................100% Virgin Medical Grade Polypropylene
■
Attached Springs..............................................Polyethylene
■
Silanization Type..............................................Vapor Phase Method
Septa
■
PTFE Disk...........................................................0.010” PTFE
■
FEP / Natural Rubber.....................................0.002” FEP / 0.037” Natural Rubber
■
FEP / Butyl.........................................................0.002” FEP / 0.037” Butyl
■
ETFE / Burnt Red Silicone.............................0.002” Clear ETFE / 0.037” Burnt Red Silicone
■
PTFE / Silicone (Includes Pre-Cut)..............0.005” Red PTFE / 0.035” White Silicone or
0.005” Blue PTFE / 0.035” White Silicone
■
PTFE / Silicone / PTFE...................................0.005” Red PTFE / 0.030” White Silicone
0.005” Red PTFE
MicroLiter
888.232.7840 (TF) | 770.932.6565 (INT’L) |
www.wheaton.com|
infomlas@wheaton.com